The Bird Apartment - Collective Housing For 78 Birds and One Human.

This a an unusual treehouse designed by Japanese design firm Nendo for the Ando Momofuku Center, a facility devoted to promoting and increasing access to nature activities. The facility is located in a forest in Komoro City in Japan's mountainous Nagano Prefecture. Nendo's treehouse is designed to be collective housing for many birds and one person.



On one side, the treehouse has entrances to 78 nest spaces for birds:




The other side has an entrance for one person, who can look into the birds' nests from inside the treehouse:







photos by Masaya Yoshimura / Daici Ano

Stats and Facts About 1 World Trade Center (aka Freedom Tower)

We will never forget.
May all the victims of 9/11 Rest In Peace forevermore.

The FACETURE Machine and the Unusual Molded Vases, Lamps and End Tables by Phil Cuttence.

The FACETURE series by Phil Cuttance consists of handmade faceted vessels, lightshades and an end table. Each object is produced individually by casting a water-based resin into a simple handmade mould. The mould is then manually manipulated to create the each object's form before each casting, making every piece utterly unique.

The FACETURE machine, 2012.


The FACETURE machine's construction is simple and purposeful, screwed together to allow it to be flat-packed for shipping. Wheels make the machine portable within a working space.





The shelving beneath provides storage for freshly cast pieces, and room for the casting stool to be stored.



The ‘hopper’ holding the powder is made simply from polypropylene sheet, in the same way as the moulds.



The casting jig at the back of the machine is simple and allows the artist to peer into the mould and control the flow of the fast setting resin. This means it is being cast evenly and economically, leaving a thin yet strong wall thickness. It can be attached at two different widths to accommodate different sized moulds, such as vases or a table.


The FACETURE project was created with the support of Creative New Zealand.

FACETURE lightshades, 2012


Each lightshade is handmade, unique, and numbered on the top. They measure approximately 32cm deep x 19cm diameter and are available in blue, charcoal, pink, yellow. Custom colours are also available.

Faceture light shades must be used with a CFL/ECO bulb with a maximum wattage of 25W. (A 25W CFL bulb emits the equivalent light to a 100W incandescent bulb.) To protect your shade do not exceed this.

FACETURE vases, 2012

Each vase is handmade, unique, available in two sizes and numbered on the base.



Available in two sizes; tall - 46 x 12 cm approx. and small - 35 x 8 cm approx
Standard colours - Charcoal, blue, yellow, pink, white. Custom colours available.

FACETURE side tables, 2012

Each table is handmade, unique, and numbered on the base.

above left is the mould in which the table on the above right was cast



The tables measure approximately 56cm tall x 28cm diameter and are available in blue, charcoal, pink, yellow as per vases and light shades. Custom colours are also available.

images by Petr Krejci and Phil Cuttance

FACETURE 'wide' vase for MINT shop, 2012, on sale now at MINT

The 'wide' faceture vase, shown above, is exclusively available through the MINT store in London and retails for £375.



email mail@philcuttance.com for pricing and to order.
Click here for a list of stockists

Hi-Tech Goes Old School. IMPOSSIBLE Turns iPhone Images Into Instant Polaroids!

On their journey toward inventing a new analog instant camera, Impossible, who took over the last remaining Polaroid film factory in the Netherlands in 2008, has created the incredible Instant Lab. This revolutionary device is based on the new Impossible FPU and bridges the worlds of digital and analog photography, turning pixelated iPhone images into unique and real analog instant photos on Impossible film.




The Impossible Instant Lab is designed to transform any digital image via your iPhone into an instant photo that is exposed using only the light from the display, then processed and developed by chemicals. A photo that exists physically – in real life. A photo that is a one-of-a-kind original that can be shared, exhibited and preserved. A photo that no longer needs an electronic device to be seen.



Determined to reinvent instant integral film for vintage Polaroid SX-70, 600 and Spectra cameras, the Impossible Project continues to come up with new ideas and products for a new generation of analog instant film lovers.

The press release:
IMPOSSIBLE ANNOUNCES BREAKTHROUGH IN ANALOG INSTANT CAMERA DEVELOPMENT. NEW MODULAR PLATFORM IS BASIS FOR VARIOUS NEW ANALOG INSTANT DEVICES. FIRST CONCEPTS INTRODUCED IN KICKSTARTER CAMPAIGN AND AT PHOTOKINA 2012

New York, USA, 10 September 2012. – After 18 months of intense research and development, Impossible today introduces a groundbreaking module for analog instant photography: A high precision platform named “Impossible FPU” (Film Processing Unit), that processes and develops Impossible instant film. This highly advanced device is the basis for a range of new analog instant cameras and hardware concepts to be introduced in 2013.


above: The first prototype, handmade in the Enschede factory from salvaged parts by Henny Wanders and the first test shoots.

When Polaroid discontinued camera production in 2007, all know-how, machinery and components linked to analog instant camera production were being disrupted. With Impossible being dedicated to today’s creative market of analog instant photography by re-inventing new instant film materials, the development of a new analog instant hardware was the next major ambition. Impossible reinvented the FPU from scratch, based on today’s available components and materials and new expectations and demands.

The IMPOSSIBLE FPU (Film Processing Unit):




The Impossible FPU will serve as the high-precision heart and modular platform of new analog instant photography instruments. All 48 components have been newly developed, including a new gear system, and unlike classic Polaroid hardware the FPU features a modern and ecological rechargeable battery. This allows the use of new, dedicated Impossible film packs that will no longer contain a disposable battery.



Prof. Achim Heine, designer of the FPU and Impossible R&D team member explains: “Classic Polaroid cameras were not much help when facing the challenge of developing a new instant camera concept. We had to rethink and develop innovative ideas for the future to make this possible. Today we are very excited to present the FPU as a new basis that will allow for a range of exciting and affordable analog instant instruments.”



The Impossible FPU was developed by the Impossible R&D team in partnership with DHW of the former Rollei Factory in Braunschweig, Germany. First concept studies based on the new FPU will be introduced at Photokina 2012.

The Specs:
• Dimensions (metric): collapsed 148mm long x 111mm wide x 62mm tall; expanded 176mm tall
• Dimensions (english): collapsed 5.8" long x 4.3" wide x 2.4" tall; expanded 6.9" tall
• Micro-processor-controlled film development unit with Smart Charger
• Li-Ion rechargable battery – 150(!) development cycles with one charge
• Cradle for iPhone4/4S and iPhone5 – have an Android device? Click here
• Compatible with instant film for Polaroid 600 and SX 70 cameras
• International Patent Pending

THE IMPOSSIBLE INSTANT LAB
The first hardware concept based on the FPU is the IMPOSSIBLE INSTANT LAB, presented in a Kickstarter campaign launching today. This innovative tool turns digital iPhone images into real analog instant photos on Impossible film, using an accompanying Impossible iPhone app.



Florian Kaps, founder of Impossible explains:
“The Instant Lab is the Impossible answer to a question that we have been posing for a long time: Is there a convenient but truly analog way to transfer our everyday’s iPhone images into these unique, real and magic photographs we love so much? The experience of now finally merging the digital with the analog world of photography using this Impossible machine exceeds our wildest expectations."

The Instant Lab will see its first life appearance at TechCrunch Disrupt SF 2012.



Today they are launching a Kickstarter campaign running until October 8 and looking to raise a minimum of $250,000 USD - the necessary funds to turn their working prototype into a final product. If successful it is planned to introduce the Instant Lab in February 2013.

They have carefully planned a timeline for the mass-production and delivery of the devices approximately 22–24 weeks after Kickstarter funding, starting mid-February 2013. Orders are processed in the order received. Kickstarter is the only place they will offer the following for pre-sale. With your support they can make the Impossible possible.





Visit them on kickstarter here